THICKNER
CHEM THICK TK60
Chem Thick TK60 is Co-Polymer product of Ethyl Acrylate. It is used with Chem Binder – FA45 to make the paste for flocking requirements.
TECHNICAL SPECIFICATIONS :
- PHYSICAL STATE : Milky Liquid
- CHEMICAL NATURE : Co-Polymer of Ethyl Acrylate
- SOLID CONTENTS : 30% ± 2
- POLYMER CONTENTS : 25% ± 2
- PH VALUE : 4.5 – 5
- SOLUBILITY : Highly soluble in water
- STABILITY : Stable in Mild-Alkaline medium
- SPECIFIC GRAVITY : 1.04
APPLICATION : (Binder Paste)
The paste of the Binder – FA45 is formed by addition of suitable quantities of Chem Thick TK60.
- CHEM THICK TK60 : 5 – 7%
(THICKNER is mixed gently under stirring till fine paste.)
SUGESSIONS :
The Product should be stored in a cool dry place away from heat and hot pipe lines. Stir the Product Carboys well before use.
Note : The above information are accurate and based on the best of our knowledge. Any suggestion is welcome but we do not give any gurantee because using conditions are beyond our control.
CHEM THICK –STF
Chem Thick – NTP/STF is a synthetic thickner used with binder bn for making pigment printing paste.
TECHNICAL SPECIFICATIONS :
- PHYSICAL STATE : Creamish Paste
- SOLID CONTENTS : 60% ± 2
- PH VALUE : 4.5 – 5
- SOLUBILITY : Highly soluble in water
- STABILITY : Stable in Mild-Alkaline medium
- SPECIFIC GRAVITY : 1.04
APPLICATION :
The paste of the Binder – Bn is formed by addition of suitable quantities of Chem Thick – NTP/STF.
- CHEM THICK – NTP/STF : 3-4%
(THICKNER is mixed gently under stirring till fine paste.)
SUGESSIONS :
The Product should be stored in a cool dry place away from heat and hot pipe lines. Stir the Product Carboys well before use.
Note : The above information are accurate and based on the best of our knowledge. Any suggestion is welcome but we do not give any gurantee because using conditions are beyond our control.
CHEM BINDER - SLM
Chem Binder – SLM is Co-Polymer product of Butyl Acrylate & Styrene Monomer. It is used in Pigment printing on Textile fabric.
APPLICATION : (Binder Paste)
- Chem Binder – SLM : 10 – 15 % (As per Colour / Shade %)
- Chem Emulsi – X : 1%
- Fixer CCL : 1%
- Urea : 2 – 5%
- Di-Amonium Phosphate : 2%
- THICKNER : 2 – 3%
(THICKNER is mixed gently under stirring till fine paste.)
SUGESSIONS :
The Product should be stored in a cool dry place away from heat and hot pipe lines. Stir the Product Carboys well before use
Note : The above information are accurate and based on the best of our knowledge. Any suggestion is welcome but we do not give any gurantee because using conditions are beyond our control.
BINDER HS ECO
Binder HS ECO is Co-Polymer product of Butyl Acrylate & Styrene Monomer.This product is eco friendly product and it is APEO, NPEO free product. It is used in Pigment printing on all kind of Textile fabric.
TECHNICAL SPECIFICATIONS :
- PHYSICAL STATE : Milky Liquid
- CHEMICAL NATURE : Co-Polymer of Butyl Acrylate & Styrene Monomer
- SOLID CONTENTS : 55% ± 2
- POLYMER CONTENTS : 48% ± 2
- PH VALUE : 7.5 – 8
- SOLUBILITY : Highly soluble in water
- STABILITY : Stable in Mild-Alkaline medium
- SPECIFIC GRAVITY : 1.04
SUGESSIONS :
The Product should be stored in a cool dry place away from heat and hot pipe lines. Stir the Product Carboys well before use.
Note : The above information are accurate and based on the best of our knowledge. Any suggestion is welcome but we do not give any gurantee because using conditions are beyond our control.
FOAM BINDER - FP
Foam Binder – FP is Co-Polymer product of Butyl Acrylate & Styrene Monomer with a blend of foam powders. It is a buff coloured paste used in Pigment printing on Textile fabric to give a 3-D rubberized type effect. Any pigment dispersion can be added to give coloured 3-D effect on fabric after printing, drying and curing
TECHNICAL SPECIFICATIONS :
- PHYSICAL STATE : Buff coloured paste
- CHEMICAL NATURE : Co-Polymer of Butyl Acrylate & Styrene Monomer
- SOLID CONTENTS : 60% ± 2
- POLYMER CONTENTS : 40% ± 2
- PH VALUE : 7.5 – 8
- SOLUBILITY : Highly soluble in water
- STABILITY : Stable in Mild-Alkaline medium
- SPECIFIC GRAVITY : 1.04
APPLICATION : (Binder Paste)
It is directly printed on the desired fabric surface, and after priting, drying and curing at a preferably 125 degree celcius temperature it gives a 3-D rubberized effect.
SUGESSIONS :
The Product should be stored in a cool dry place away from heat and hot pipe lines. Stir the Product Carboys well before use.
Note : The above information are accurate and based on the best of our knowledge. Any suggestion is welcome but we do not give any gurantee because using conditions are beyond our control.
- Arihant Chemicals
- H 34/38, Sector - 3, Rohini, New Delhi - 110085
- 01276267428
- info@arihant-chemicals.com